Gokul Traders

• Non waterproof
• Measure depth of small groove & hole
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch, present(+,-)
• Automatic power off,  move the digital unit to turn on power
• Battery CR2032
• Made of stainless steel

•  Dial indicator graduation: 0.01mm
•  Accuracy: +0.03mm
•  Stainless steel base
•  Extension rods: 25mm (1 pc), 50mm (1 pc), 75mm (1 pc), 100mm (2 pcs)
• Supplied with pointed tip and ball tip
•  Optional accessory: granite extension holder (code 2141-10)

• Graduation : 0.1 mm
• Made of stainless steel

• Supplied with two screws
• Made of stainless steel
• Suitable for depth gages

• Made of stainless steel
• Satin chrome plating finish on reading surface
• Optional accessory: extension base (code 6141 )

• Accuracy ±0.017mm
• Stainless steel base
• Supplied with pointed tip & ball tip

• NG-2 Handle NG2000

NogaGrip-1- holds all N blades (2.6 mm). Spare blades can be kept insise the handle. Designed for maximum comfort in your hand.

• NG-3 Handle NG3000

NogaGrip-3- holds all blades. Spare blades can be kept insise the handle. Designed for maximum comfort in your hand.

• S Holder El02003

Holds S blades (2.6mm). N holder telescopes from 30-115mm. Length 131mm.

• MAGIC BURR 2 NG2002

Will do most of your deburring jobs. INCLUDES : NG – 2 handle, N1 & N2 blades.

• MAGIC BURR 4 NG2004

Same as NG2002 with 2 extra blades in difficult to reach places. INCLUDES : NG – 1 handle, N1, N2, N3  & N6 blades.

• TELE BURR NG3002

Very popular tool. Holds 2.6 mm N blades . INCLUDES: NG-3 Handle, N Holder, N1 & N2 blades.

• TEDDY BURR TB1000

Design for hard to reach loactions Blade is replaceable. Steel housing for long life of handle. INCLUDES: N1 blade mounted in an 8mm painted hexogonal aluminum handle.

• Measures the outside diameter of cutting tools (such as taps, reamers, end mills) with an odd numbers of flutes.
• Measures pitch diameter: refer to “Quick Guide to Precision Measuring Instruments”
• Measuring faces: Carbide tipped
• Equipped with Ratchet Stop for constant measuring force.

• The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

Steel Parallel are made from high quality steel. These steel parallels are available in hardened and precision ground finish. We provide unmatched range of Steel Parallel in a wide range to our valuable clients. Clients can avail this steel parallel at competitive price in the market. These steel parallels are available in hardened and precision ground finish and lapped all the four faces are working faces which exhibits optimum durability, excellent resistance to corrosion and dimensional accuracy.

• We are offering Can Seam Micrometer to our clients.                                               

• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide
• Equipped with Ratchet Stop for constant measuring force.

• Measure hub thickness and shoulder inside a bore
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm)

• Micrometer head 1000-1050mm or 40-42, diameter of rod 28mm or 1.102"

• Carbide tips

• With zero adjusting wrench

• Spindle made from stainless steel for rust prevention
• Measuring faces: hardened steel
• An in-built ratchet in the thimble
• Zero setting once done cannot be easily tampered with
• Sharp laser marking for better visibility & durability
• Heat insulating grip plates cover the entire handling portion of the micrometer frame
• Robust design withstands toughest workshop conditions

• Non-rotating spindle type which accepts seven forms of optional interchangeable anvil / spindle tip (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
• Equipped with Ratchet Stop for constant measuring force.
• Optional anvils / spindle tips for screw thread measurement (matching V and cone) are also available.

• Graduation 0.01mm
• Non-rotating spindle
• Ratchet stop
• Supplied with 7 pairs of anvil/spindle tip
• Setting standards are included (except 0-25mm)
• Optional accessary: anvil/spindle tip (code 3280-SP1 and 3280-SP2)

• Resolution 0.001mm/0.00005″
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• SR44 or LR44 battery, automatic power off
• Ratchet stop
• Supplied with 7 pairs of anvil/spindle tip (same as series 3280, previous page)
• Setting standards are included (except 0-25mm/0-1″)
• Optional accessary: anvil/spindle tip code 3280-SP1 and 3280-SP2 (same as series 3280, previous page), data output system

• Accuracy: (6+L/50)µm L=maximum measuring length (mm)
• Optional accessary: setting ring (code 6312)

• Meet DIN863-2
• Graduation : 0.01mm
• Micrometer head accuracy : +/-3μm
• Rod accuracy : +/-(2L/75)μm
  L is the measuring range in mm
• Rods with flat end
• Ratchet stop

• Meet DIN863-2
• Graduation: 0.01mm
• Micrometer head accuracy: +/-3um
• Rod accuracy: +/-(2+L/75)um, L is the measuring range in mm
• Rods with flat or spherical end
• Ratchet stop

• Resolution: 0.001mm/0.00005*
•  Micrometer head accuracy: +/-3um
• Rod accuracy: +/-(2+L/75)um, L is the measuring range in mm
• Button function: on/off, set, mm/inch, data transmit
• IP65 dust/waterproof
• Data output
• Automatic power off
• Rods with flat end
• Ratchet stop
• Optional accessory: data output cable

DIAL SNAP GAGES

• Left anvil retracting stroke: 2mm
• Measuring force: 6-8N
• Flatness of anvil: 1.5μm
• Repeatability: 1μm
• Carbide measuring faces for anvils
• Front edges of anvils are chamfered for easy work piece insertion
• Optional accessory: dial indicators and digital indicators (reading 0.001mm or 0.01mm)

• Measuring Force	8N
  Flatness of Anvil	1.5um
  Repeatability	1um
  Parallelism of Measuring Faces	4 um

• Twin channel gauge units with selectable probe combinations of +A, -A, +B, -B, +A +B, +A -B, -A +B, -A -B
• Inch and Metric measuring ranges
• RED, GREEN and YELLOW tolerance lamps for REJECT, ACCEPT and REWORK indications
• RS232 data output
• Comprehensive outputs for further processing
• Compatible with Half-bridge and LVDT type inductive measuring probes
• Sturdy, Ergonomic design, suitable for shop floor environment
• Splash proof and sealed against dust
• Add-on Modules available for various applications e.g. Light Grading Module, Relay Module, etc.
• Mains supply 220 volts AC

• Removes chips and cleans the chip trays on your machines.
• Black finished steel hooks.
• This modular chip hook allows extensions of 200 mm increments from the standard length of 300 mm.
• Includes a special ø130mm guard to protect your hand and extension rod.
• Fitted with a Noga Grip handle, designed for maximum comfort in your hand.

• CA1010 Hex Key
• CA1004 Nozzle
• CA1001 Adaptor

• Single arm with 2 end ball joints so the nozzles can move on wide curve for positioning

• Long articulated arms provide full axis rotation. Sturdy tightening fixtures for total stability.

We are engaged in trading and wholesaling of Ceramic Gauge Blocks to our clients. Clients can avail this ceramic gauge blocks at competitive price in the market. Ceramic gauge blocks have the ability to resist corrosion and wear and tear out. These ceramic gauge blocks are available in custom length from a minimum number of pieces. Ceramic gauge blocks are designed using exactly advanced technology.

Other Details:

• Ceramic gage block made of ceramic, extremely wear resistance and corrosion resistance, excellent dimension stability
• Meet ISO3650
• Ceramic gage block supplied with manufacturer inspection certificate