Special Micrometer
Our product range includes a wide range of baker disc micrometer (rotating & non-rotating type), baker digital tube micrometer (one & both end spherical), baker point micrometer, baker spline micrometers, insize non rotating spindle disk micrometer (code - 3294) and mitutoyo series 324 digital gear tooth micrometer with interchangeable ball anvil/ spindle tip type.
BAKER DISC MICROMETER (ROTATING & NON-ROTATING TYPE)
Request Callback
Disc Micrometer Rotating Type
₹ 4000 / Piece Get Latest Price
Product Brochure
| Measuring Range | 0-25 , 25-50 , 50-75 , 75-100 mm |
| Brand | Baker |
| Material | Stainless Steel |
| Reading | 0.01 |
| Country of Origin | Made in India |
| Product Code | MMC |
- Disc Micrometer Rotating TypeFEATURES:
- Spindle made from stainless steel for rust prevention
- Measuring faces: hardened steel
- An in-built ratchet in the thimble
- Zero setting once done cannot be easily tampered with
- Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop conditions
- Non-rotating spindle (only axial moment of spindle)
- Spindle made from stainless steel for rust prevention
- Measuring faces: hardened steel
- An in-built ratchet in the thimble
- Zero setting once done cannot be easily tampered with Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop conditions
Disc Micrometer Rotating Type
| Measuring Range | Reading | Type | A mm | B mm | C mm | Measuring Range | Reading | Type |
|---|---|---|---|---|---|---|---|---|
| 0-25 | 0.01 | MMC25-D | 10 | 36 | 29 | 0-1″ | 0.001″ | INC1-D |
| 25-50 | 0.01 | MMC50-D | 7.1 | 61.5 | 31 | 1-2″ | 0.001″ | INC2-D |
| 50-75 | 0.01 | MMC75-D | 8 | 87 | 45.5 | 2-3″ | 0.001″ | INC3-D |
| 75-100 | 0.01 | MMC100-D | 5.9 | 110 | 57.5 | 3-4″ | 0.001″ | INC4-D |
Disc Micrometer Non-Rotating Type
| Measuring Range mm | Reading mm | Type | A mm | B mm | C mm | Measuring Range Inch | Reading Inch | Type |
|---|---|---|---|---|---|---|---|---|
| 0-25 | 0.01 | MMC25-ND | 10 | 36 | 29 | 0-1″ | 0.001″ | INC1-ND |
| 25-50 | 0.01 | MMC50-ND | 7.1 | 61.5 | 31 | 1-2″ | 0.001″ | INC2-ND |
| 50-75 | 0.01 | MMC75-ND | 8 | 87 | 45.5 | 2-3″ | 0.001″ | INC3-ND |
| 75-100 | 0.01 | MMC100-ND | 5.9 | 110 | 57.5 | 3-4″ | 0.001″ | INC4-ND |
BAKER DIGITAL TUBE MICROMETER (ONE & BOTH END SPHERICAL)
Request Callback
₹ 2077 / Number Get Latest Price
Product Brochure
| Usage/Application | For measuring curved surfaces, wall thickness of tube, rings, bearings etc. |
| Brand | Baker |
| Accuracy | 0.001 mm |
| Model Name/Number | MMC |
| Reading | 0-01 mm |
| Range | 25-50 mm |
| Country of Origin | Made in India |
Minimum order quantity: 1 Number
- Measure wall thickness of tubes
- Resolution 0.001mm/0.00005″
- IP65 dust/waterproof
- Button function: on/off, set, mm/inch, data transmit
- Data output
- Automatic power off
- Ratchet stop
- Carbide measuring faces
- Supplied with setting standards (except 0-25mm/0-1″)
- Optional accessory: data output cable
| DIGITAL TUBE MICROMETER ONE END SPHERICAL | Type | Range | Reading |
| DMM25-T1 | 0-25 mm | 0.001 mm / 0.00005″ | |
| DIGITAL TUBE MICROMETER ONE END SPHERICAL | Type | Range | Reading |
| DMM25-T1 | 0-25 mm | 0.001 mm / 0.00005″ |
Baker Point Micrometer
Request Callback
₹ 4075 / Piece Get Latest Price
Product Brochure
| Brand | Baker |
| Material | Stainless Steel |
| Product Code | MMC - P1 / P2 |
| Measuring Range mm | 0-25 |
| Reading mm | 0.01 |
| Point Angle Degrees | 15 |
- Spindle made from stainless steel for rust prevention
- Measuring Faces – 15° & 30° hardened steel points having radius 0.3 mm approximately
- Point micrometer in-built ratchet in the thimble
- Zero setting once done cannot be easily tampered with Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop conditions
| Measuring Range mm | Reading mm | Point Angle Degrees | Type | A mm | B mm | C mm | Measuring Range inch | Reading inch | Type |
| 0-25 | 0.01 | 15 | MMC25-P1 | 7.1 | 57.5 | 30.5 | 0-1″ | 0.001″ | INC1-P1 |
| 0-25 | 0.01 | 30 | MMC25-P2 | 7.1 | 57.5 | 30.5 | 0-1″ | 0.001″ | INC1-P2 |
| 25-50 | 0.01 | 15 | MMC50-P1 | 8 | 83 | 45 | 1-2″ | 0.001″ | INC2-P1 |
| 25-50 | 0.01 | 30 | MMC50-P2 | 8 | 83 | 45 | 1-2″ | 0.001″ | INC2-P2 |
| 50-75 | 0.01 | 15 | MMC75-P1 | 8 | 108 | 58 | 2-3″ | 0.001″ | INC3-P1 |
| 50-75 | 0.01 | 30 | MMC75-P2 | 8 | 108 | 58 | 2-3″ | 0.001″ | INC3-P2 |
| 75-100 | 0.01 | 15 | MMC100-P1 | 8 | 133 | 67.5 | 3-4″ | 0.001″ | INC4-P1 |
| 75-100 | 0.01 | 30 | MMC100-P2 | 8 | 133 | 67.5 | 3-4″ | 0.001″ | INC4-P2 |
BAKER SPLINE MICROMETERS
Request Callback
₹ 4207 / Piece Get Latest Price
Product Brochure
| Packaging Type | Wooden or Plastic Box |
| Brand | Baker |
| Model Name/Number | MMC |
| Usage/Application | For measuring grooves, slots, keyways and small parts in precision work |
| Reading | 0.01 mm |
| Range | 0-25 mm |
Minimum order quantity: 1 Piece
- Spindle of Spline Micrometers made from stainless steel for rust prevention
- Measuring faces: carbide tipped available in two types Ø2 x 5 mm & Ø3 x 8 mm
- Zero setting once done cannot be easily tampered with
- An in-built ratchet in the thimble
- Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop conditions
| Measuring Range mm | Reading mm | Type | A mm | B mm | C mm | D mm | E mm | Measuring Range inch | Reading inch | Type |
| 0-25 | 0.01 | MMC25-S2 | 7.1 | 57.5 | 30.5 | 2 | 5 | 0-1″ | 0.001″ | INC1-S2 |
| 25-50 | 0.01 | MMC50-S2 | 8 | 83 | 45 | 2 | 5 | 1-2″ | 0.001″ | INC2-S2 |
| 50-75 | 0.01 | MMC75-S2 | 8 | 108 | 58 | 2 | 5 | 2-3″ | 0.001″ | INC3-S2 |
| 75-100 | 0.01 | MMC100-S2 | 8 | 133 | 67.5 | 2 | 5 | 3-4″ | 0.001″ | INC4-S2 |
| 0-25 | 0.01 | MMC25-S3 | 7.1 | 57.5 | 30.5 | 3 | 8 | 0-1″ | 0.001″ | INC1-S3 |
| 25-50 | 0.01 | MMC50-S3 | 8 | 83 | 45 | 3 | 8 | 1-2″ | 0.001″ | INC2-S3 |
| 50-75 | 0.01 | MMC75-S3 | 8 | 108 | 58 | 3 | 8 | 2-3″ | 0.001″ | INC3-S3 |
| 75-100 | 0.01 | MMC100-S3 | 8 | 133 | 67.5 | 3 | 8 | 3-4″ | 0.001″ | INC4-S3 |
Insize Non Rotating Spindle Disk Micrometer (Code - 3294)
Request Callback
₹ 4115 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Accuracy | 4um |
| Parallelism | 5um |
| Product Code | 3294/3594 |
| Graduation | 0.01mm |
| Length | 34 mm |
NON-ROTATING SPINDLE DISK MICROMETERS (ECONOMIC TYPE)
- Meet DIN863-3
- Measure root tangent length of gear
- Graduation 0.01mm
- Non-rotating spindle
- Ratchet stop
- Supplied with setting standards
|
Code |
Range |
Accuracy |
Parallelism |
L |
b |
|
3294-25 |
0-25mm |
4µm |
5µm |
24 |
24 |
|
3294-50 |
25-50mm |
4µm |
5µm |
59 |
32 |
|
3294-75 |
50-75mm |
5µm |
5µm |
85 |
45 |
|
3294-100 |
75-100mm |
5µm |
5µm |
110 |
57 |
MITUTOYO SERIES 324 DIGITAL GEAR TOOTH MICROMETER WITH INTERCHANGEABLE BALL ANVIL/ SPINDLE TIP TYPE
Request Callback
₹ 30375 / Piece Get Latest Price
Product Brochure
| Range | 0 - 25 mm |
| Resolution | 0.001 |
| Type | Digital |
| Brand | Mituyoyo |
| Series | 324 |
- This specialized micrometer series measures gear over-pin diameters. Attach optional ball for various gear modules (0.5 to 5.25) are probes to each measuring face betore use.
- Determination of the over-pin diameter: refer to "Quick Guide to Precision Measuring Instruments"
- Interchangeable ball anvils/ spindle tips for various gear modules (0.5 to 5.25) are optional
Screw Thread Micrometer
Request Callback
₹ 4500 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Product Code | 3281 / 3581 |
| Graduation | 0.01mm |
| Length | 42 mm |
| Optional Accessary | 55 Degree Setting Standards |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
V Anvil Micrometer
Request Callback
₹ 7750 / Piece Get Latest Price
Product Brochure
| Accuracy | 4um |
| Brand | Insize |
| Range | 1-15um |
| Product Code | 3290/3590 |
| Graduation | 0.01mm |
| Flutes | 3 |
V-ANVIL MICROMETERS
|
Code |
Range |
Flutes |
Accuracy |
|
3290-153A |
1-15mm |
3 |
4µm |
|
3290-203A |
5-20mm |
3 |
4µm |
|
3290-353A |
20-35mm |
3 |
5µm |
|
3290-503A |
35-50mm |
3 |
5µm |
|
3290-653A |
50-65mm |
3 |
6µm |
|
3290-803A |
65-80mm |
3 |
6µm |
|
3290-953A |
80-95mm |
3 |
7µm |
|
3290-255A |
5-25mm |
5 |
4µm |
|
Code |
Range |
Flutes |
Accuracy |
|
3290-455A |
25-45mm |
5 |
5µm |
|
3290-655A |
45-65mm |
5 |
6µm |
|
3290-855A |
65-85mm |
5 |
7µm |
|
3290-1055A |
85-105mm |
5 |
8µm |
|
3290-257A |
5-25mm |
7 |
4µm |
|
3290-457A |
25-45mm |
7 |
5µm |
|
3290-657A |
45-65mm |
7 |
6µm |
|
3290-857A |
65-85mm |
7 |
7µm |
Sheet Metal Deep Throat Micrometer
Request Callback
₹ 4800 / Piece Get Latest Price
Product Brochure
| Accuracy | 7um |
| Brand | Insize |
| Range | 0-25mm |
| Country of Origin | Made in India |
| Product Code | 3239 |
| Graduation | 0.01mm |
SHEET METAL MICROMETERS
- Deep frame suitable for sheet metal, paper and plastic
- Graduation 0.01mm
- Ratchet stop
- Carbide measuring faces
|
Code |
Range |
Type |
Accuracy |
b |
|
3239-253 |
0-25mm |
A |
7µm |
155 |
|
3239-253F |
0-25mm |
B |
7µm |
155 |
|
3239-254F |
0-25mm |
B |
10µm |
310 |
|
3239-253S |
0-25mm |
C |
7µm |
155 |
Mitutoyo Spline Small Tip Micrometer
Request Callback
₹ 1000 / Piece Get Latest Price
Product Brochure
| Brand | Mitutoyo |
| Display | LCD |
| Country of Origin | Made in India |
| Range (mm) | 0 - 25 |
| Resolution (mm) | 0.001 |
| Maximum Permissible Error JMPE (um) | +-2 |
| Flatness (um) | 0.3 |
| Parallelism (um) | 2 |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
Mitutoyo Spherical Anvil Tube Ball Micrometer
Request Callback
₹ 1000 / Piece Get Latest Price
Product Brochure
| Brand | Mitutoyo |
| Type | Digital |
| Country of Origin | Made in India |
| Range (mm) | 0 - 25 |
| Resolution (mm) | 0.001 |
| Maximum Permissible ErrorJMPE (um | +-2 |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
Mitutoyo Blade Micrometer
Request Callback
₹ 1000 / Piece Get Latest Price
Product Brochure
| Brand | Mitutoyo |
| Usage/Application | Laboratory |
| Display | LCD |
| Country of Origin | Made in India |
| Range (mm) | 0 - 25 |
| Resolution (mm) | 0.001 |
| Maximum Permissible Error JMPE (um) | +-3 |
| Parallelism (um) | 3 |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
Miutoyo Point Micrometer
Request Callback
₹ 1000 / Piece Get Latest Price
Product Brochure
| Brand | Mitutoyo |
| Display | LCD |
| Country of Origin | Made in India |
| Range (mm) | 0 - 25 |
| Resolution (mm) | 0.001 |
| Maximum permissible Error JMPE (um | +-3 |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
Mitutoyo Disc Micrometer
Request Callback
₹ 1000 / Piece Get Latest Price
Product Brochure
| Brand | Mitutoyo |
| Display | LCD |
| Country of Origin | Made in India |
| Range (mm) | 0 - 25 |
| Resolution (mm) | 0.001 |
| Anvil Dia. (mm) | 20 |
| Maximum Permissible Error JMPE (um) | +-4 |
| Flatness (um) | 1 |
| Parallelism (um) | 4 |
| Measuring Force (N) | 3 - 8 |
We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.
Sheet Metal Micrometers
Request Callback
Get Latest Price
Product Brochure
| Accuracy | +/- 4 micro meter |
| Brand | Mitutoyo |
| Model Name/Number | 119-202 |
| Range | 0 - 25mm |
| Graduation | 0.01mm |
| Throat depth | 50 mm |
Mitutoyo-SERIES 119-Sheet Metal Micrometer
Sheet Metal Micrometer Code 3263
Mitutoyo-SERIES 389, 118-Sheet Metal Micrometers
Sheet Metal Micrometer Code 3239
Digital Sheet Metal Micrometer Code 3539
- Large diameter dial model enables easy and quick measurement of sheet metal thickness.
- Adjustable anvil.
- Measuring faces: Carbide
- Equipped with Ratchet Stop for constant measuring force.
Sheet Metal Micrometer Code 3263
- Measure thickness of sheet metal, paper, plastic and rubber parts
- Graduation 0.01mm
- Ratchet stop
- Carbide measuring faces
Mitutoyo-SERIES 389, 118-Sheet Metal Micrometers
- Measures thickness of sheet metal.
- IP65 water/dust protection (series 389).
- Measuring faces: Carbide
- Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
- Equipped with Ratchet Stop for constant measuring force.
Sheet Metal Micrometer Code 3239
- Deep frame suitable for sheet metal, paper and plastic
- Graduation 0.01mm
- Ratchet stop
- Carbide measuring faces
Digital Sheet Metal Micrometer Code 3539
- Deep frame suitable for sheet metal, paper and plastic
- Resolution 0.001mm/0.00005″
- IP54 dust/waterproof
- Button function: on/off, set, mm/inch, ABS/INC, data output
- Data output
- LR44 battery, automatic power off
- Ratchet stop
- Carbide measuring faces
- Optional accessory: data output cable (code 7306-30, 7302-SPC2A, 7305-SPC3)
Limit Micro Meters
Request Callback
Get Latest Price
Product Brochure
| Accuracy | +/- 3 micro meter |
| Brand | Mitutoyo |
| Model Name/Number | 113-102 |
| Range | 0 - 25mm |
| Flatness | 0.6 micro meter |
| Graduation | 0.01mm |
Minimum order quantity: 1 Number
Mitutoyo-SERIES 113-Limit Micrometers
Limit Micrometer Code 3235
- Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
- Measuring faces: Carbide
Limit Micrometer Code 3235
- Used as Go/No-Go gauge by setting upper and lower limits
- Graduation 0.002mm
- Carbide measuring faces
- Supplied with setting standard (except 0-25mm)
Gear Tooth Micrometer
Request Callback
Get Latest Price
Product Brochure
| Packaging Type | Wooden or Plastic Box |
| Accuracy | +/- 4 micro meter |
| Brand | Mitutoyo |
| Model Name/Number | 324-251-30 |
| Range | 0 - 25mm |
| Resolution | 0.001mm |
Mitutoyo-SERIES 324, 124 — Interchangeable Ball Anvil / Spindle Tip Type-Gear Tooth Micrometers
Gear Tooth Micrometer Code 3291
Digital Gear tooth Micrometer Code 3591
Ball Tips Gear tooth micrometer Code 7391
- Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
- Series 324: IP65 Digimatic gear tooth micrometers.
- Determination of the over-pin diameter: refer to “Quick Guide to Precision Measuring Instruments”.
- Interchangeable ball anvils / spindle tips for various gear modules (0.5-5.25) are optional.
- Equipped with Ratchet Stop for constant measuring force.
- Ball anvil / spindle tips: optional.
Gear Tooth Micrometer Code 3291
- Measure over-pin diameter of gears
- Graduation 0.01mm
- Ratchet stop
- Optional accessary: ball tips (code 7391, next page)
- Supplied with setting standards (except 0-25mm)
Digital Gear tooth Micrometer Code 3591
- Measure over-pin diameter of gears
- Resolution 0.001mm/0.00005″
- IP54 dust/waterproof
- Button function: on/off, set, mm/inch, ABS/INC, data output
- Data output
- SR44 or LR44 battery, automatic power off
- Ratchet stop
- Supplied with setting standards (except 0-25mm/0-1″)
- Optional accessary: ball tips (code 7391, next page), data output system
Ball Tips Gear tooth micrometer Code 7391
- Supplied in pair
- Suitable for 3291, 3591 Series micrometers
BAKER MICROMETER HEAD
Request Callback
₹ 1500 / Piece Get Latest Price
Product Brochure
| Material | Stainless Steel |
| Brand | Baker |
| Accuracy | 0.001 mm |
| Country of Origin | Made in India |
| Product Code | MM25 |
| Measuring Range mm | 0-25 |
| Reading mm | 0.01 |
Micrometer Head – Plain Holding Diameter
Micrometer Head – Threaded Holding Diameter
- Spindle made from stainless steel for rust prevention
- Measuring face: carbide tipped, precision ground & micro lapped
- An in-built ratchet in the thimble
- Sharp laser marking for better visibility & durability
Micrometer Head – Threaded Holding Diameter
- Spindle made from stainless steel for rust prevention
- Measuring face: carbide tipped, precision ground & micro lapped
- An in-built ratchet in the thimble
- Sharp laser marking for better visibility & durability
| Micrometer Head – Plain Holding Diameter | |||||
| Measuring Range mm | Reading mm | Type | Measuring Range inch | Reading inch | Type |
| 0-25 | 0.01 | MM25-HP | 0-1″ | 0.001″ | IN1-HP |
| 0-25 | 0.001 | MM25-1HP | 0-1″ | 0.0001″ | IN1-1HP |
| Micrometer Head – Threaded Holding Diameter | |||||
| Measuring Range mm | Reading mm | Type | Measuring Range inch | Reading inch | Type |
| 0-25 | 0.01 | MM25-HT | 0-1″ | 0.001″ | IN1-HT |
| 0-25 | 0.001 | MM25-1HT | 0-1″ | 0.0001″ | IN1-1HT |
INSIZE POINT MICROMETER (Code - 3230)
Request Callback
₹ 3675 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Baker |
| Accuracy | 4um |
| Product Code | 3230/3530 |
| Graduation | 0.01mm |
| Length | 57 mm |
POINT MICROMETERS
- Measure the web thickness of drills, small grooves and keyways
- Graduation 0.01mm
- Ratchet stop
- Carbide tips
- Supplied with setting standards(except 0-25mm)
|
Code |
Range |
Type |
Accuracy |
L |
b |
|
3232-25A |
0-25mm |
A |
4µm |
57 |
32 |
|
3232-50A |
25-50mm |
A |
4µm |
82 |
44.5 |
|
3232-75A |
50-75mm |
A |
5µm |
107 |
57 |
|
3232-100A |
75-100mm |
A |
5µm |
132.6 |
69.5 |
|
3232-25BA |
0-25mm |
B |
4µm |
57 |
32 |
|
3232-50BA |
25-50mm |
B |
4µm |
82 |
44.5 |
|
3232-75BA |
50-75mm |
B |
5µm |
107 |
57 |
|
3232-100BA |
75-100mm |
B |
5µm |
132.6 |
69.5 |
INSIZE GEAR TOOTH MICROMETER (Code - 3291)
Request Callback
₹ 6580 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Accuracy | 4um |
| Product Code | 3291/3591 |
| Graduation | 0.01mm |
| Length | 67mm |
GEAR TOOTH MICROMETERS
- Meet DIN863-3
- Measure over-pin diameter of gears
- Graduation 0.01mm
- Ratchet stop
- Supplied with setting standards (except 0-25mm)
- Optional accessory: ball tips (code 7391)
|
Code |
Range |
Accuracy |
L |
b |
|
3291-25 |
0-25mm |
4µm |
67 |
38 |
|
3291-50 |
25-50mm |
4µm |
92.4 |
50 |
|
3291-75 |
50-75mm |
5µm |
117.6 |
62 |
|
3291-100 |
75-100mm |
5µm |
143 |
70 |
|
3291-125 |
100-125mm |
6µm |
168.2 |
82 |
|
3291-150 |
125-150mm |
6µm |
192 |
94.5 |
|
3291-175 |
150-175mm |
7µm |
217 |
107 |
INSIZE Spline Micrometer (Code - 3233)
Request Callback
₹ 3415 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Accuracy | 4um |
| Product Code | 3233/3533 |
| Graduation | 0.01mm |
| Length | 57 mm |
SPLIINE MICROMETERS
- Meet DIN863-3
- Measure splined shafts, slots and keyways
- Graduation 0.01mm
- Ratchet stop
- Carbide measuring faces
- Supplied with setting standards (except 0-25mm)
|
Code |
Range |
Type |
Accuracy |
|
3233-25A |
0-25mm |
A |
4µm |
|
3233-50A |
25-50mm |
A |
4µm |
|
3233-75A |
50-75mm |
A |
5µm |
|
3233-100A |
75-100mm |
A |
5µm |
|
3233-125A |
100-125mm |
A |
6µm |
|
3233-150A |
125-150mm |
A |
6µm |
|
3233-175A |
150-175mm |
A |
7µm |
|
3233-25BA |
0-25mm |
B |
4µm |
|
3233-50BA |
25-50mm |
B |
4µm |
|
3233-75BA |
50-75mm |
B |
5µm |
|
3233-100BA |
75-100mm |
B |
5µm |
|
3233-125BA |
100-125mm |
B |
6µm |
|
3233-150BA |
125-150mm |
B |
6µm |
|
3233-175BA |
150-175mm |
B |
7µm |
INSIZE BLADE MICROMETER (CODE - 3232)
Request Callback
₹ 6460 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Accuracy | 4um |
| Product Code | 3232 / 3532 |
| Graduation | 0.01mm |
| Length | 57mm |
BLADE MICROMETERS
- Meet DIN863-3
- Measures the groove diameter of shafts and keyways
- Graduation 0.01mm
- Non-rotating spindle
- Ratchet stop
- Supplied with setting standards(except 0-25mm)
|
Code |
Range |
Type |
Accuracy |
|
3232-25A |
0-25mm |
A |
4µm |
|
3232-50A |
25-50mm |
A |
4µm |
|
3232-75A |
50-75mm |
A |
5µm |
|
3232-100A |
75-100mm |
A |
5µm |
|
3232-125A |
100-125mm |
A |
6µm |
|
3232-150A |
125-150mm |
A |
6µm |
|
3232-175A |
150-175mm |
A |
7µm |
|
3232-25BA |
0-25mm |
B |
4µm |
|
3232-50BA |
25-50mm |
B |
4µm |
|
3232-75BA |
50-75mm |
B |
5µm |
|
3232-100BA |
75-100mm |
B |
5µm |
|
3232-125BA |
100-125mm |
B |
6µm |
|
3232-150BA |
125-150mm |
B |
6µm |
|
3232-175BA |
150-175mm |
B |
7µm |
INSIZE DIGITAL CYLINDRICAL ANVIL TUBE MICROMETER (CODE - 3561)
Request Callback
₹ 10930 / Piece Get Latest Price
Product Brochure
| Range | 0-25 mm / 0-1" |
| Permissible Errors G | Range - 0-25mm/0-1" |
| Repeatability Limit R | Range - 0-25mm/0-1" |
| Product Code | 3561 |
| Type | a |
- Measure wall thickness of tubes
- Resolution 0.001mm/0.00005"
- IP54 dust/waterproof
- Button function: on/off, set, mm/inch, data transmit
- Data output
- Automatic power off
- Ratchet stop
- Carbide spindle tip
- Supplied with setting standards (except 0-25mm/0-1")
- Optional accessory: data output cable
INSIZE LARGE MICROMETER HEAD (CODE - 6388)
Request Callback
₹ 10885 / Pack Get Latest Price
Product Brochure
| Range | 0-50 mm |
| Brand | Insize |
| Model Name/Number | 6388 |
| Molding Type | Micrometer Head |
| Stem | with Clamp nut / Plain |
- Graduation 0.01mm
- Ratchet stop
| Code | Range | Stem | Spindle tip | Accuracy |
|---|---|---|---|---|
| 6388-50A | 0-50mm | with clamp nut | flat (carbide) | 5µm |
| 6388-50W | 0-50mm | plain | flat (carbide) | 5µm |
INSIZE SCREW THREAD MICROMETER (Code - 3281)
Request Callback
₹ 11660 / Piece Get Latest Price
Product Brochure
| Range | 25-50mm |
| Permissible Errors G | 3281 |
| Repeatability Limit R | 3281 |
| Product Code | 3281 |
| Country of Origin | Made in India |
| Brand | INSIZE |
- Measure pitch diameter of screw threads
- Graduation 0.01mm
- Non-rotating spindle
- Ratchet stop
- Supplied with 60° setting standards
- Optional accessary: 55° setting standards
Baker Micrometer Head
Request Callback
₹ 1450 / Piece Get Latest Price
Product Brochure
| Brand | Baker |
| Material | Stainless Steel |
| Product Code | MM25 - HP |
| Measuring Range mm | 0-25 |
| Reading mm | 0.01 |
| Packaging Type | Box |
Features:
- Spindle made from stainless steel for rust prevention
- Measuring face: carbide tipped, precision ground & micro lapped
- An in-built ratchet in the thimble
- Sharp laser marking for better visibility & durability
Inisze Spherical Anvil Tube Ball Micrometer
Request Callback
₹ 1635 / Piece Get Latest Price
Product Brochure
| Range | 0-25mm |
| Brand | Insize |
| Accuracy | 4um |
| Product Code | 3260 / 3560 |
| Graduation | 0.01mm |
| Length | 32mm |
SPHERICAL ANVIL TUBE MICROMETERS
- Meet DIN863-3
- Measure wall thickness of tubes
- Graduation 0.01mm
- Ratchet stop
- Carbide measuring faces
- Supplied with setting standards(except 0-25mm)
|
Code |
Range |
Type |
Accuracy |
L |
b |
|
3260-25A |
0-25mm |
A |
4µm |
32 |
24 |
|
3260-50A |
25-50mm |
A |
4µm |
57 |
32 |
|
3260-75A |
50-75mm |
A |
5µm |
82 |
44.5 |
|
3260-100A |
75-100mm |
A |
5µm |
107 |
57 |
|
3260-25SA |
0-25mm |
B |
4µm |
32 |
24 |
|
3260-SA |
25-50mm |
B |
4µm |
57 |
32 |
|
3260SA |
50-75mm |
B |
5µm |
82 |
44.5 |
|
3260-100SA |
75-100mm |
B |
5µm |
107 |
57 |
Baker Spline Small Tip Micrometer
Request Callback
₹ 3800 / Piece Get Latest Price
Product Brochure
| Brand | Baker |
| Usage/Application | For measuring recessess, grooves, splines, Slots, Keyways & small parts in precision work |
| Material | Stainless Steel |
| Measuring Faces | 2x5 mm, 3x8 mm |
| Country of Origin | Made in India |
| Measuring Range mm | 0-25 |
| Reading mm | 0.01 |
| Product Code | MMC - S |
Features:
- Spindle made from stainless steel for rust prevention
- Measuring faces: carbide tipped available in two types Ø2 x 5 mm & Ø3 x 8 mm
- Easy zero setting on sleeve
- An in-built ratchet in the thimble
- Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop conditions
Baker Spherical Anvil Tube Ball Micrometer
Request Callback
₹ 1850 / Piece Get Latest Price
Product Brochure
| Brand | Baker |
| Material | Stainless Steel |
| Measuring Range | 0-25 mm |
| Reading | 0.01 mm |
| Country of Origin | Made in India |
| Application | For measuring curved surfaces & wall thickness of tubes, rings, bearings etc. |
| Product Code | MMC - T1 / T2 |
Features:
- Spindle made from stainless steel for rust prevention
- Measuring faces: hardened steel available in two types:
T1 – one end spherical
T2 – both ends spherical - An in-built ratchet in the thimble
- Easy zero setting on sleeve
- Sharp laser marking for better visibility & durability
- Heat insulating grip plates cover the entire handling portion of the micrometer frame
- Robust design withstands toughest workshop condition
X
Product Videos
View AllContact Us
Pralhad Laddha (Partner)
Gokul Traders
Ground Floor, Shop No.1, Ahura Apartment, Laxmi Road Near Sonya Maruti Chowk, 983,Raviwar Peth
Pune - 411002, Maharashtra, India
Send Email