Machine Vices

Approx. Rs 25,000 / PieceGet Latest Price

• Entire range of horizontal, vertical indexed milling operations can be done with our range of products.
• Job Clamping is fast, indexing is quick thereby increasing production efficiency.
• Indexing Fixture models covers the advantage of conventional Dividing Head and Rotary Table put together.
• Movable Parts are hardened & Ground for long life.
• Indexing accuracy is precise and products can be used on surface grinding also.
• Combination of ball bearings and taper roller bearings on jig bored holes for accurate & easy rotation.
• Tail Stock with lead screw movement is provided for center support of long shaft / jobs.
• Tail Stock Center is sliding in hardened and accurately ground bushes.
• In most models, 24 indexing positions are provided.
• There is also a graduated collar with 1 deg least count which facilitates odd degree indexing also.
• With all these additional advantages, fixtures are priced much lower than conventional dividing head or rotary table.

Approx. Rs 2,000 / PieceGet Latest Price

• Casting close grained high tensile Seasoned Cast Iron.
• Screw spindle made of tool steel cut spindle thread for firm gripping and smooth operation.
• Fully Hardened and ground tool Steel Jaws.
• The 360° Swivel Base, graduated in 1° increment.
• alignment on the Machine table through longitudinal slot provided in the base.
• Accurate centring of jobs automatically.

Approx. Rs 6,500 / PieceGet Latest Price

• Made of Ductile Iron (Unbreakable Steel Body)
• Unique design for high accuracy.
• Minimum vibration.
• Low height with rigidity.

Approx. Rs 12,000 / PieceGet Latest Price

• Accurately designed for use on surface, universal tool & cutter grinding machines.
• Unbreakable steel body.
• Accurately groung jaws made out of special steel for firm grip.
• All swivelling movements have positive locking and the job can be locked at any compound angle.

Approx. Rs 7,500 / PieceGet Latest Price

• Fitted with Thrust Bearing for Smooth Movement.
• Body is made of grey cast iron.
• High quality ACME steel screw.
• Hardened & accurately ground jaws provided with ‘V’ groove .
• This vice can'set up at any angle with positive locking.
• Upper angle base can incline from the horizontal position to the vertical position.
• The lower angle setting base can incline up to 45º in both right & left directions.
• The entire unit may be swivelled on a base plate through 360º
• Quick alignment to machines through longitudinal slot provided in base.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Supplied with Stopper for Fast Production.

Approx. Rs 12,000 / PieceGet Latest Price

• Fitted with Thrust Bearing for Smooth Movement.
• Body and base are made of special high strength fine-grain Cast iron for toughness and rigidity.
• Moving Jaw run in long Prismatic slides with provision for wear adjustment.
• The removable hardened steel Jaws. Fix jaw is provided with "V" grooves.
• The totally enclosed acme thread adjusting screw with a replacable screw bushing & thrust collar.
• The vice can be centered using longitude tenon slots. Supplied complete with handle.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Vertical tilting capacity through 90º Positive locking to withstand heavy loads.
• Supplied with Stopper for Fast Production.

Approx. Rs 9,000 / PieceGet Latest Price

• Fitted with Thrust Bearing for Smooth Movement Sturdy & accurately made machine vices from graded casting.
• Body and base are made of special high strength fine-grain Cast iron for toughness and rigidity.
• Moving Jaw run in long Prismatic slides with provision for wear adjustment.
• The removable hardened steel Jaws. Fix jaw provided with "V" grooves.
• The totally enclosed acme thread adjusting screw with a replacable screw bushing & thrust collar.
• The vice can be fitted to the tool table with or without the 360º graduated base.
• The vice can be centered using longitude tenon slots. Supplied complete with handle.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Supplied with Stopper for Fast Production.

Approx. Rs 7,500 / PieceGet Latest Price

• Heavy duty shaper vice sturdy constructed from close grain casting for use on shaper machines, planners & other heavy duty machines permitting wider application for taller work pieces.
• It is designed to permit maximum opening jaws to hold heavy & taller jobs.
• High tensile steel square thread screw.
• The jaws are made of special steels. These are precisely ground & serrated to ensure firm grips on heavy jobs.
• Swivel base is indexed to 360º, when required to use as stationery vice, the base can be removed.
• Crank Handle is made of unbreakable steel, provided with a spring loaded mechanism providing positive grip.

Approx. Rs 7,000 / PieceGet Latest Price

• Fitted with Thrust Bearing for Smooth Movement Sturdy & accurately made machine vices from graded casting.
• Fine acme thread screw.
• Jaws are made of special steel properly hardened, fixed jaw is provided with vertical & horizontal ‘V’ groove to hold the round job firmly.
• The swivel base is graduated fully through 360º.
• Vice can be converted from swivel base to fix by removing the base.
• Quick alignment to machines through longitudinal slot provided in base & body.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Supplied with Stopper for Fast Production.

Approx. Rs 5,000 / PieceGet Latest Price

• This high precision screwless vise has a one-piece body.
• Precision ground to a mirror finish.
• Ideal for holding small parts.
• Simple operation and extremely versatile
• The body and jaws are hardened .
• All sides are flat, square, and parallel .

Approx. Rs 20,000 / PieceGet Latest Price

• Rigid Material Vise Body of Ductile Iron for milling, drilling, shaping, grinding and many other shop applications.
• New Design: Lock Proof System : Prevent wrong clamping stucks the Vice.
• Clamping Force : 4000-4500 KGF.
• Sliding Bed ways hardened and ground.
• Concealed spindle for protection against chips and dirt.
• Hydraulic- Booster system for maximum clamping pressure with minimum force,
• Quick of clamping & locking and easy of operation.
• Accuracy in Squareness within 0.02/100 MM
• Furnished with or without swivel base.

Approx. Rs 8,500 / PieceGet Latest Price

• Rigid Material Vise Body of Ductile Iron.
• Fitted with Thrust Bearing for Smooth Movement.
• Unique Tilt Lock Vices can with stand heavy jobs.
• Top & Bottom of vice bed, bottom & both sides of jaws & all jaw mounting surfaces are precision ground.
• By reversing the jaw plates the jaws are raised & can be fitted to both ends of the fixed jaws & the moveable jaws.
• The four different positions of jaw plates pair are available for more gripping area.
• Coolant through on vise body and swivel base.
• Chip clearance holes ........ no dead pockets.
• Swivel handle allows the screw head revolved on machine table.
• The vice can be disassembled and repaired by regrinding.
• Supplied with Stopper for Fast Production.

Approx. Rs 25,500 / PieceGet Latest Price

• Unique Precision Compound Sliding Tables are meant for accurate boring, drilling grinding and milling operations.
• Grey iron casting properly machined and grinded with a Unique process provides accuracy well within 0.01mm/100mm tolerance.
• Toughened lead screw having acme threads running smoothly in phosphorus Bronze Nut.
• Dovetail slides have adjustable steel ribs for smooth running and adjustment.

Approx. Rs 25,000 / PieceGet Latest Price

• Unique Dividing heads are carefully designed for tool Rooms as well as for production purpose .
• They are suitable for indirect and differential indexing as well as for spiral and cam milling operations on universal milling machine.
• Unique dividing heads are manufactured from Selected high quality material with Superior workmanship.

Approx. Rs 8,500 / PieceGet Latest Price

• The Table & Body manufacturered from close grain shock resisting cast iron.
• The body is provided with two bolt slots in Code No. U335 & U337 for mounting on machine .
• Table vertically & Horizontally.
• Provided with quick & precise disengagement of worm drive.
• Efficient lock provided.
• End play in wormshaft is adjustable.
• An eccentric sleeve with thrust Bearing races in the worm shaft.
• Provision for fine zero adjustment when setting work piece.Works as an index centre in the vertical position as well as convential Rotary Table grarduated 360º Indexing Plate is provided to enable the user to convert quickly to use indexing plates for fast setting.
• Direct reading to 2 minutes for size 6", 8" & 10" on hand wheel scale.
• Direct reading to 1 minute for size 12", 15",18" & 20" in hand wheel scale.
• High accuracy, easy reading of all dias clear & functional arrangement of all operating elements sturdy yet simple good looking practical design. These are widely used for circular cutting, angle setting, boring & spot facing with a milling machine.

• Maximum error 2 miniutes of circular division using hand wheels.
• Table flat to within 0.005mm/100mm.
• Working surface rotates in its own plane to within 0.01 mm.
• Horizontial & vertical supporting surface square within 0.01mm/100mm..
• Centre bush bore is true to table axis within 0.008 mm.
• Maximun parrallism error through 360º rotation of table is 0.001mm.

Approx. Rs 1,100 / PieceGet Latest Price

• Unique Mechanic’s Bench Vices is made of closed grain cast iron.
• Provided with unbreakable steel nut.
• Serrated Jaws of special steel properly tempered to ensure a strong grip and are interchangeable.
• Square thread lead screw of alloy steel is matched properly with nut for long and durable life.
• Swivel Base rotates 360º and can be locked firmly at any point.

Approx. Rs 900 / PieceGet Latest Price

• Pipe vice provided with square steel pillar.
• Replaceable steel jaws.
• Pipe vice provided with round grinded pillar.
• Replaceable steel jaws.

Approx. Rs 1,500 / PieceGet Latest Price

• Continuous Screw giving powerful grip on work.
• No lifting of the sliding jaw.
• Moving jaw is plain & fixed is provided with one vertical & one horizontal 90° V-grooves.

Approx. Rs 10,500 / PieceGet Latest Price

• Fitted with Thrust Bearing for Smooth Movement.
• Positive locking to withstand heavy loads.
• Horizontal Swivel movement 360º.
• Vertical swivel movement 90º.
• Fine acme thread screw made out of special steel.
• Quick alignment to machine tables using a longitudinal slot.
• One vertical Two horizontal ‘V’ grooves are provided in hardened and ground jaws .
• Crank Handle is made of unbreakable steel provided with a spring loaded mechanism.
• Supplied with Stopper for Fast Production.