Gokul Traders

• Graduation: metric 0.01mm | inch 0.0001″
• Carbide measuring faces
• Meet DIN863
• Supplied with setting standards (except 0-25mm and 0-1″)

• Specifications : IS, DIN, ANSI & JIS
• Spindle made from stainless steel for rust prevention
• Measuring faces: carbide tipped, precision ground & micro lapped
• An in-built ratchet in the thimble
• Easy zero setting on sleeve.
• Sharp laser marking for better visibility & durability
• Heat insulating grip plates cover the entire handling portion of the micrometer frame
• Robust design withstands toughest workshop conditions

• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards

• Resolution 0.001mm/0.0001″ (resolution of 3506-100A and 3506-150A is 0.001mm/0.00005″)
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• SR44 or LR44 battery, automatic power off
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards
• Optional accessory: data output system

• Light weight tubular frame design with handle grips
• Measuring faces: carbide tipped, precision ground & micro lapped
• Spindle made from stainless steel for rust prevention
• Sharp laser marking for better visibility & durability

NOTE: Setting Standards – Both End Spherical

The 500-1000mm micrometers are made with lightweight Aluminum Cast I-Section frame design which offers sufficient strength, resistance to bending moment and are easy to use as compared to the pipe construction frame. In I-Section more than 90% of the bending moment is resisted due to I-shape. I-Section design has higher moment of resistance because the area of flanges is away from the neutral axis. At the same time the heat transfer due to hand is also very less compare to the pipe constructions.

Each micrometer offers superior design and workmanship to ensure high precision and long life – at Economical Prices.

FEATURES

• Sturdy & Light weight Aluminum frame design
• Measuring faces: carbide tipped, precision ground & micro lapped
• Spindle made from stainless steel for rust prevention (01 Omm, Pitch 1 mm and Stroke 50mm)
• Sharp laser marking for better visibility & durability
• Ratchet stop thimble for exact and repetitive reading
• One Setting standard covers the entire measuring range
• Delivered in wooden box with Add on Extension, setting standard, Spanner & Calibration certificate

• Measure over-pin diameter of gears
• Resolution 0.001mm/0.00005″
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, data output
• Data output
• Automatic power off
• Ratchet stop
• Supplied with setting standards (except 0-25mm/0-1″)
• Optional accessary: ball tips (code 7391)
• Data output cable

• Measure the web thickness of drills, small grooves and keyways
• Resolution 0.001mm/0.00005"
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, data output
• Data output
• Automatic power off
• Ratchet stop
• Carbide tips
• Supplied with setting standards (except 0-25mm/0-1")
• Optional accessory: data output cable

• Measure the height of crimp contact
• Graduation 0.01mm
• Ratchet stop
• Supplied with setting standards (except 0-25mm)

• Measure wall thickness of tubes
• Graduation 0.01mm
• Ratchet stop
• Carbide spindle tip
• Supplied with setting standards (except 0-25mm)

• Meet DIN863-3
• Measure wall thickness of tubes
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm)

• IP65 dust/waterproof
• Button function: on/off, set, mm/inch, data transmit
• Automatic power off
• Carbide measuring faces
• Supplied with spherical anvil
• Setting standards are included (except 0-25mm/0-1")
• Optional accessory: data output cable
• Supplied with manufacturer calibration certificate

DIGITAL OUTSIDE MICROMETERS(BASIC TYPE,WITHOUT DATA OUTPUT)

Resolution 0.001mm/0.00005"

Button function: on/off, set, mm/inch, ABS/INC

No data output

LR44 battery, automatic power off

Carbide measuring faces

Friction thimble

Supplied with spherical anvil

Setting standards are included (except 0-25mm/0-1")

Set

• Measure splined shafts, slots and keyways
• Resolution 0.001mm/0.00005"
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, data transmit
• Data output
• Automatic power off
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm/0-1")
• Optional accessory: data output cable

• Protection level IP65 against dust & water (coolant proof)
• Stainless steel spindle to avoid rust
• Carbide measuring faces
• mm / inch conversion
• Auto power off
• SR44/LR44 battery
• Ball attachment free of cost
• Absolute & incremental measuring mode
• Easy operations with 2 buttons
• Each micrometer is supplied with calibration certificate stating actual values
• Supplied in attractive sturdy box
• Real value for money

• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force

OUTSIDE MICROMETERS WITH INTERCHANGEABLE ANVILS

• Graduation 0.01mm
• Ratchet stop
• Meet DIN863-3
• Carbide measuring faces
• Supplied with setting standards

• World's highest performing micrometer overall.
• Extended battery life of approximately 2.4 years.
• Ergonomic anti-slip frame cover and front panel for more comfortable hand-held measurements.
• Ratchet thimble provides better operability for one-handed operation.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. (Refer to page A-3 for details.)
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. (Refer to page A-13 for details.)
• Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble. 
• Measuring faces: Carbide.

• Resolution 0.001mm
• IP54 dust/waterproof
• Button function: on/off, set, ABS/INC
• Without data output
• SR44 or LR44 battery, automatic power off
• Carbide measuring faces
• Supplied with spherical anvil
• Setting standards are included (except 0-25mm)

• Resolution 0.001mm/0.00005″
• Button function: on/off, set, mm/inch, ABS/INC
• No data output
• LR44 battery, automatic power off
• Carbide tips Ratchet thimble
• Supplied with spherical anvil
• Setting standards are included (except 0-25mm/0-1″)

• Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads.
• Direct reading of screw pitch diameter (no need for calculation)
• Equipped with Ratchet Stop for constant measuring force.
• Interchangeable anvils / spindle tips are optional.

• Fixed anvil type to suit 60º threads
• Directly indicates screw pitch diameter (no need for calculation)
• Equipped with Ratchet Stop for constant measuring force.

• Measure pitch diameter of screw threads
• Graduation 0.01mm
• Non-rotating spindle
• Ratchet stop
• Supplied with 60° setting standards
• Optional accessary: 55° setting standards, measuring tips (code 7381, previous page)
• Measure pitch diameter of screw threads
• Graduation 0.01mm
• Non-rotating spindle
• Ratchet stop
• Supplied with 60° setting standards
• Optional accessary: 55° setting standards, measuring tips (code 7381, previous page)

• Measure pitch diameter of screw threads
• Resolution 0.001mm/0.00005″
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• SR44 or LR44 battery, automatic power off
• Non- rotating spindle
• Ratchet stop
• Supplied with 60° setting standards
• Optional accessary: 55° setting standards, measuring tips (code 7381,previous page), data output cable (code 7306-30, 7302-SPC2A, 7305-SPC3)

• Specifications : IS, DIN, ANSI & JIS
• Interchangeable anvils
• Spindle made from stainless steel for rust prevention
• Measuring faces: carbide tipped, precision ground & micro lapped
• An in-built ratchet in the thimble
• Easy zero setting on sleeve.
• Sharp laser marking for better visibility & durability
• Robust design withstands toughest workshop conditions

• Suitable for micrometers up to 100mm

• Suitable for micrometers up to 100mm

• Meet DIN863-2
• Graduation 0.01mm
• Accuracy : 3μm

MICROMETERS STAND

• Suitable for micrometers up to 100mm

• Suitable for inside micrometers

• Suitable for three points internal micrometers