Gokul Traders

• Resolution: 0.01mm/0.0005″
• Buttons: zero, on/off, mm/inch
•  Battery SR44 or LR44
•  Data output
•  Meet DIN862
•  Optional accessory: data output system

• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• New ergonomic design with finger rest.
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. Scale overspeed-error has been eliminated for maximum reliability.
• Large and clear LCD readout.
• Smooth slider movement makes for comfortable operation.
• Extended battery life of Approx. 5 years due to low current integrated circuit (except for 0 to 300 mm/0 to 12 inch models).
• Allows step measurement.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)

• Carbide tipped jaws for inside and outside measurements
• Resolutions: 0.01mm/0.0005*
• Buttons : zero, mm/inch, on/off
• After power off, move the digital unit to turn on power
• Battery CR2032
• Data Output
• Meet DIN862
• Made of stainless steel
• Optional accesory: data output system
• Supplied with manufaturer calibration certificate

• Non waterproof
• Resolutions: 0.01mm/0.0005*
• Buttons : zero, mm/inch, on/off, ABS, data preset
• Battery CR2032
• Data Output
• Made of stainless steel
• Optional accesory: data output system (code 7306-20/20B, 7302-SPC1A/SPC1B, 7305-SPC2)

• Accurate and highly environmentally resistant, assisting with many types of measurements
• Ratchet thimble provides better operability for one-handed operation.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.

• Designed to mount a dial indicator for direct GO/NG judgment for mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are available depending on the measurement type (accuracy required, measuring range, etc.).
• Measuring faces: Carbide tipped
• Anvil stroke: 3 mm Only stems of 08 diameter are supported, but even these may not be supported by some models. Please contact our Customer Support Center or your nearest Mitutoyo sales office for detailed specifications.

• This is a screw thread micrometer with changeable anvil and spindle tips. It enables direct reading of screw pitch diameter. Both analog and digital types are available.
• Interchangeable anvil and spindle tips are optional. Select the right model to meet the specifications of your screw thread.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60°

• Measures “root tangent length” of spur gears and helical gears.
• Determination of the root tangent length: refer to “Quick Guide to Precision Measuring Instruments”.
• Equipped with Ratchet Stop for constant measuring force.

• The U-shaped micrometer is ideal for measuring the thickness of sheet metal at a considerable distance from the edge.
• Measuring faces: Carbide tipped.
• Profile of measuring faces: Flat-Flat, Sperical-Flat and Sphercial-Spherical.
• Ip65 water/ dust protection (except for 389-514 and 389-714).
• Equipped with Ratchet Stop for constant measuring force.

• Designed to measure workpieces with concave-concave surfaces. The spherical contact with the workpiece at a point, thus Increasing measurement accuracy.
• IP65 water/dust protection (series 395).
• Equipped with Ratchet Stop for constant measuring force.

• The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways.
• IP65 water/dust protection (series 331).
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

• Every gauge carries a calibration certificate giving actual values
• With 0.02 mm / 0.001” Least Count
• Measures OD, ID, Step and Depth
• Accuracy as per DIN 862
• Robust, Hardened and Ground stainless steel jaws and beam
• Supplied in a sleek plastic box

• Every gauge carries a calibration certificate giving actual values
• With 0.02 mm / 0.001” Least Count
• Measures OD, ID, Step and Depth
• Accuracy as per DIN 862
• Robust, Hardened and Ground stainless steel jaws and beam
• Supplied in a sleek plastic box

• Non waterproof
• Made of hard plastic, non-magnetic and non-conductive
• Prevent workpieces from scratching by calipers
• Resolutions: 0.01mm/0.0005*
• Buttons : zero, mm/inch, on/off
• Battery CR2032, automatic power off

• Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range from 450 mm to 1000 mm.
• Allows step measurement.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. (Refer to page A-3.)
• For details of the Absolute scale and its function, refer to page D-6. 

• Every gauge carries a calibration certificate giving actual values
• Checks OD, ID, step and depth
• Robust, hardened and ground stainless steel jaws and beam
• With 0.02 mm Least Count
• Accuracy as per DIN 862
• Clear, easy to read graduated dial with adjustable bezel
• Shock Proof movement
• Supplied in a sleek plastic box

• Every gauge carries a calibration certificate giving actual values
• Large Liquid Crystal Display for good visibility
• Robust, hardened and ground stainless steel jaws and beam
• All three digital calipers are capable of External, Internal, Step and Depth measurement.
• All three digital calipers are fitted with thumb-roller to improve quality of measurement.
• Easy operation
• Battery replacement is fast and reliable.
• Manual and Auto power off facility.
• Accuracy as per DIN 862

• Inside and outside measurements can be read directly from the upper and lower vernier scales.
• The jaws have radiused measuring faces for accurate inside diameter (ID) measurement.
• With fine adjustment (Order No. 160-127/128/101/104).

• World's highest performing micrometer overall.
• Extended battery life of approximately 2.4 years.
• Ergonomic anti-slip frame cover and front panel for more comfortable hand-held measurements.
• Ratchet thimble provides better operability for one-handed operation.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. (Refer to page A-3 for details.)
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. (Refer to page A-13 for details.)
• Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble.
• Measuring faces: Carbide.  

• Every gauge carries a calibration certificate giving actual values
• With 0.02 mm / 0.001” Least Count
• Measures OD, ID, Step and Depth
• Accuracy as per DIN 862
• Robust, Hardened and Ground stainless steel jaws and beam
• Supplied in a sleek plastic box

• Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes.
• Measures pitch diameter: refer to “Quick Guide to Precision Measuring Instruments” on page B-73.
• Measuring faces: Carbide
• Equipped with Ratchet Stop for constant measuring force.

• Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards

• Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 flutes
• Resolution 0.001mm/0.00005″
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• LR44 battery, automatic power off
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards
• Optional accessory: data output cable (code 7306-30, 7302-SPC2A, 7305-SPC3 )

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Setting ring (nominal size below 300mm), CERA Inside Micro Checker (more than 50mm), and Gauge Block accessory set are provided as a reference gage for datum adjustment (refer to page C-47, C-26, and E-17 – E20 for details).

• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide
• Equipped with Ratchet Stop for constant measuring force.

• Graduation 0.01mm
• Non-rotating spindle
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm)

We are offering our clients a broad array of Dial Depth Gauge. These products are fabricated from high quality, strong and smooth-finished metal bezel and are used in various industrial and mechanical processes. Our product range is available in various ranges and readings as per the industry requirements. Primarily used in power industry, our range is designed using quality raw material to assure outstanding performance at client’s end. Dial marking of these gauges is available in standard as well as in customized form.

Specifications:

• Optional graduations: 0.02mm, 0.02mm/0.001", 0.05mm

• With auto clamp

• Meet DIN862, monoblock, made of hardened stainless steel, satin chrome plated reading surface

• Packed in plastic box

• Waterproof Digital Caliper Unconditional immunity to penetration of liquids or dust.

• Waterproof Digital Caliper Reliability and Accuracy of measuring tool is assured even in the most hostile workshop environment.

• Waterproof Digital Caliper is High contrast Liquid Crystal Display

• Ergonomic beam design increases comfort; reduces fatigue.

• Equipped with latest and exclusive Swiss measuring technology S.I.S. (Smart Inductive System)

• Measuring ranges : ZD10 : 0 – 150 mm, ZD20 : 0 – 200 mm & ZD30 : 0 – 300 mm.

• Automatic stand-by mode.

• Waterproof Digital Caliper Origin securely saved even in stand-by mode.

• Auto switch-on by motion of slider.

• Waterproof Digital Caliper New, Proximity type, contactless RS232 data output allows user to store and analyse measurement data in PC or any other digital data storage apparatus.

• Errors conform to DIN 862.

• Waterproof Digital Caliper Every caliper furnished with Certificate of Calibration stating actual values and errors.

• Carbide tips
• Measure the tooth thickness by positioning the tooth height (for tooth height>1mm)
• Made of stainless steel
• Satin chrome plated reading surface

• Range 0-6.5 mm
• Gradutation : 0.01 mm
• Accuracy : 5μm

• Every gauge carries a calibration certificate giving actual values
• Highest degree of protection to a hand-held instrument of its type, IP67 (according to IEC 60529)
• Immunity to penetration of liquids or dust
• Reliability and Accuracy of measuring tool is assured even in the most
• Hostile workshop environment
• High contrast Liquid Crystal Display
• Ergonomic beam design increases comfort; reduces fatigue
• Latest Smart Inductive System (S.I.S)
• Automatic stand-by mode
• Origin securely saved even in stand-by mode
• Auto switch-on by motion of slider
• New, Proximity type contactless RS232 data output allows user to store and analyze measurement data in PC or any other digital data storage apparatus
• Accuracy as per DIN 862

• Firm Joint Calipers are ideal measurement tools for taking transfer measurements of length or working parts in an industrial setup. The legs are tempered and precision-formed to shape according to style and purpose, and are held together by a large-headed nut and screw assembly with fiber washers interposed between the contacting faces.
• This construction creates a firm friction joint that is rigid and completely without play. Once set, the caliper holds its dimension reliably under workshop and production floor conditions- making it a trusted tool for repetitive comparison and transfer work across lathe, CNC, and VMC environments.
• The nominal size is measured as the distance from the center of the nut to the working point of the leg, which also defines the effective measurement capacity of the instrument.

• Every gauge carries a calibration certificate giving actual values
• Degree of protection IP66 (according to IEC 60529)
• High contrast Liquid Crystal Display
• Ergonomic beam design increases comfort; reduces fatigue
• Fine adjustment with the lock provided for ease of setting
• Auto switch-OFF
• Accuracy as per DIN 862
• Easy and quick operation (user friendly)
• Battery changeover is fast, easy and reliable

• Resolution: 0.01mm/0.0005"

• Option:sphere tip 1.5mm/0.060"

• Rotary display in digit and analog

• RS232 output port,automatic power off

• Functions:data set,AIS/INC,mm/inch,max/min,data holding,tolerance measurement

• With spare battery

• Packed in aluminum box or plastic box