Gokul Traders

INSIDE MICROMETERS (ECONOMIC TYPE)

• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Optional accessory: setting ring (code 6312), micrometer stand and clamp (code 6301 and 6301-1) 

TUBULAR INSIDE MICROMETERS

• Graduation: 0.01mm
• Accuracy: (3+n+L/50)µm

• Supplied with setting standards
• Carbide measuring faces

• Meet DIN863-4
• 2-12mm: graduation 0.001 mm  | 12-300mm: graduation 0.005mm
• Ratchet stop
• Optional accessory: setting rings (code 6312), micrometer stand and clamp (code 6301 and 6301-2)

• The spherical anvil-type micrometer is convenient for measuring cylindrical workpieces. The spherical anvil comes into contact with a workpiece at a point instead of a surface area, thus incrasing measurement accuracy.
• IP65 water / dust protection (series 395)
• Equipped with Ratchet Stop for constant measuring force.

Bowers’ Bluetooth digital internal micrometers offer a new ergonomic design – including a larger and clearer LCD display – along with IP67 electronics protection, proximity output; allowing bi-directional
communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems. Measuring heads for threads, splines slots, grooves, deep-holes
and many more applications are available on request. The Bowers XT3 range can be supplied as individual instruments or in complete sets, with UKAS certification of measuring head as standard.

Features:

• Ergonomic design with larger and clearer LCD display
• IP67 Electronics
• Simple 2-button operation
• 4 preset memories
• Proximity output with built-in Bluetooth
• Range 2 – 300 mm (0.080″ – 12″)
• 2 – 6 mm: 2 point / 6 – 300 mm: 3 point measurement
• Resolution 0.001 mm / 0.00005″
• Tungsten carbide measuring faces on all 3-point heads from 12.5mm
• Blind bore measurement from 2 mm – 6 mm and above 12.5 mm (0.500″)
• Extensions available above 6 mm for deep hole measurement
• Ratchet stop to ensure consistent measurement
• Setting rings included with individual instruments and sets
• UKAS certificates supplied as standard with all gauges
• Serial number on all digital readouts and measuring heads
• Heads with special anvils available to suit specific customer requirements e.g. threads, grooves, 2-point, spherical, splines etc.
• Internal Micrometers manufactured according to DIN 863, part 4
• Supplied in fitted wooden case
• After sales service

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• Order No. 339-101/301/302/102/303/304 features: · IP65 (water-proof) protection level that enables use in the presence of cutting fluid. · A large-character LCD display. · Storage of 2 preset values for use when setting to an inside length standard. · A function lock that prevents accidental changing of the reference setting during measurement.

Bowers’ XT3 Holematic offers a new ergonomic design – including a larger and clearer LCD display – along with IP67 electronics protection, proximity output with built-in Bluetooth; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended
mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems. Measuring heads for threads, splines slots, grooves,
deep-holes and many more applications are available on request. The Bowers XT3 range can be supplied as individual instruments or in complete sets, with UKAS certification of measuring head as standard.

Features:

• Ergonomic design with larger and clearer LCD swivel display
• IP67 Electronics
• Simple 2-button operation
• Large easy-to-read swivel display
• 4 preset memories
• Proximity output with built-in Bluetooth
• Self-centering heads
• Constant measuring pressure
• Fast, accurate measurement
• Range 2 – 300 mm (0.080″ – 12″)
• 2 – 6 mm: 2 point / 6 – 300 mm: 3 point measurement
• Resolution 0.001 mm (0.00005″)
• Tungsten carbide measuring faces on all 3-point heads from 12.5 mm
• Blind bore measurement from 2 mm – 6 mm and above 12.5 mm (0.500″)
• Extensions available above 6 mm for deep hole measurement
• Setting rings included with individual instruments and sets
• UKAS certificates supplied as standard with all pistol-grip gauges
• Serial number on all gauges and measuring heads
• Heads with special anvils available to suit specific customer requirements (e.g., Threads, grooves, 2-point, spherical, splines etc)
• Internal Micrometers manufactured according to DIN 863, part 4
• Supplied in fitted wooden case
• After Sales Service

Why use the Microtest System?

• The Microtest Measuring System reaches the high accuracy through simultaneous operation of three measuring spindles to obtain the stop point at which the measurement is taken
• A good vibration generated by the ratchet gives repeatable measurements, independent of the user‘s sense of touch
• The plastic coating protects against spray water, dirt and thermal expansion
• The temperature-compensated design enables precise & accurate measurements even if the standard ambient temperature of 20 °C is not maintained, since the material expansions of the work piece and the measuring instrument are almost completely balanced out
• Over and above this, the Microtest System is maintenance free

• Measuring Range: Ø400 – Ø1150 mm
• 1 µm reading with parallax-free readout
• Automatic self centering for easy & safe handling
• Deep blind hole measurement
• Extensions available on demand
• Insulated construction for thermal protection
• Automatic linear wear correction through easy adjustment
• Performance of higher accuracy at low cost
• High-strength aluminium housing
• Titanium-coated star housing
• Hardened chrome-steel measuring probes
• Tungsten carbide measuring anvils
• Torque-stable ratchet
• Made in Switzerland
• After sales service

Bowers MT Analogue Bore Gauges are an economical solution to accurate shop floor bore measurement with a wide application range of 2-6mm (2-point) and 6-300mm (3-point). Sets are supplied with master setting rings and individual units supplied with or without a ring.

Features:

• Range 2-300mm
• 2-6mm : 2 point and 6-300mm : 3 point measurement
• Manufactured in the UK to Bowers’ very high quaility standards
• Precision lapped tungsten carbide measurement anvils for maximum durability
• Blind bore measurement between 2-6mm and 12-300mm

The new MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1-10 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time.

Features:

• New slim-line digital display
• Simple 2-button operation
• Clear LCD display
• Data output: RS232 / USB proximity sensor
• Linearity:
  -Diameter 1.0-1.5 max 2% of measuring travel, min 0.001 mm
  -Diameter 1.5-6 max 1% of measuring travel, min 0.001 mm
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option
• After sales service

• Measure over-pin diameter of gears
•  Resolution 0.001mm/0.00005″
•  IP65 dust/waterproof
•  Button function: on/off, set, mm/inch, data transmit
•  Data output
•  Automatic power off
•  Ratchet stop
•  Supplied with setting standards (except 0-25mm/0-1″)
•  Optional accessory: ball tips (code 7391), data output cable