Gokul Traders

DIAL TEST INDICATORS

• Meet DIN2270 (except 2380-02, 2381-02)
• Jeweled bearing
• Carbide contact point
• Two measuring directions
• Anti magnetic body
• Supplied with two clamps: diameter Ø4mm and Ø8mm
• Optional accessory: styli (page 134)

*Supplied with manufacturer inspection certificate traceable to NIST USA.

DIAL INDICATORA (BASIC TYPE)

• Meet DIN878
• Jeweled bearing
• Supplied with limit hands and bezel clamp
• Packed in carton box
• Optional accessory: backs (page 129-130), contact points (page 126-128)

MODEL 56 MECHANICAL DIAL GAUGES IS, DIN, ANSI & JIS

• Every plunger dial gauge carries a calibration certification giving actual values.
• Hardened stem for trouble free clamping.
• Spindle made of stainless steel.
• Fitted with tungsten carbide ball anvil.
• Rigid brass case for increased rigidity.
• Strong and smooth metal bezel.
• Supplied with tolerance pointers.
• Aesthetically appealing protective top cap in black color.
• Special dial Gauges for OEMs also manufactured on request.
• Complete spares and after sales service available.
• 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503.

• Specification: IS, DIN, ANSI & JIS
• Small diameter dial – convenient for use where space is limited
• Ideal for small Bore Gauges like 10 to 18 mm
• Jeweled to give accuracy and longer operational performance
• Each gauge carries a calibration certificate giving actual values
• Spindle made of stainless steel
• Fitted with tungsten carbide ball anvil
• Rigid case for increased strength
• Strong and smooth metal bezel
• Supplied with tolerance pointers
• Aesthetically appealing protective top cap in black colour
• Metric Gauges conform to company standard
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available

• Larger diameter face for easy reading
• Every gauge carries a calibration certificate giving actual values
• Hardened stem for trouble free clamping
• Spindle made of stainless steel
• Fitted with tungsten carbide ball anvil
• Rigid brass case for increased rigidity
• Strong and smooth metal bezel
• Supplied with tolerance pointers
• Aesthetically appealing protective top cap in black colour
• Metric Gauges conform to company standard
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available

• Every gauge carries a calibration certificate giving actual values
• Auto zero setting while operating
• Used in hardness testing machine
• Supplied with dual scale

• Rotating display (270 degrees ) with extra large digits for excellent visibility
• Accurate Inductive measuring system
• Inch / Metric capability
• Robust Construction
• New technology with configurable menus.
• Broad Choice of Menus (MIN / MAX / DELTA, TOL, Factor, PRESET, AUTO OFF etc.)
• Automatic wake-up and sleep mode
• RS232 data output
• Hardened and ground stainless steel plunger and stem
• GAUGE can be set to 0.01 mm / 0.0005 Inch, besides the standard 0.001 mm / 0.00005 Inch
• Each GAUGE carries a calibration certificate giving actual values

• Strong construction
• Large Digits for better viewing
• Display Resolution 0.01 mm & 0.0005 Inch
• Zero setting
• With Calibration certificate

Useful functions :

• mm / Inch
• Preset Reference
• Manual / Auto power off

• Every gauge carries a calibration certificate giving actual values
• Auto reversal mechanism
• Fitted with jewels and Swiss miniature ball bearings for smoother operation
• Robust and highly sensitive gauge suitable for workshop use
• Metric Gauges conform to IS 11498 and for the European market to DIN 2270
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• Integral dovetail offers flexibility and rigidity for mounting of the gauge
• Metric & Inch gauges are supplied with 2mm tungsten carbide ball stylus and 8 mm spigot assembly as standard supply
• No additional accessories are offered when suffix A is added to the type number

• Graduation: 0.001 mm
• Jeweled bearing
• Supplied with limit pointers and bezi clamp
• Optional accessory: backs

• Supplied with limit pointers and bezel clamp
• Optional accessory: backs
• Supplied with manufacturer inspection certificate

• Meet DIN878
• Eliminate the possibility of raeding errors due to miscounting
• Shockproof
• Supplied with limit pointers
• Optional Accessoer : backs

• An unique face reading dial gauge with sensing plunger at right angles to the dial
• Every gauge carries a calibration certificate giving actual values
• Spindle made of stainless steel
• Fitted with tungsten carbide ball anvil
• Rigid brass case for increased rigidity
• Strong and smooth metal bezel
• Suitable for mounting on machine tables, jigs and fixtures
• Used in small places where standard dial gauges are difficult to be accomodated
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available

• Specification: IS, DIN, ANSI & JIS
• Every gauge carries a calibration certificate giving actual values
• Auto reversal mechanism
• Fitted with jewels and Swiss miniature ball bearings for smoother operation
• Robust and highly sensitive gauge suitable for workshop use
• Metric Gauges conform to IS 11498 and for the European market to DIN 2270
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• Integral dovetail offers flexibility and rigidity for mounting of the gauge
• Metric & Inch gauges are supplied with 2 mm tungsten carbide ball stylus and 8 mm spigot assembly as standard supply
• No additional accessories are offered when suffix A is added to the type number
• Additional 1 mm carbide ball stylus, Height Gauge adaptor, spanner, universal clamp and 4 mm dovetail spigot assembly offered as additional accessories for gauges where type number is without suffix A

DIGITAL PLUNGER TYPE

Features:-

· Strong construction

·Large Digits for better viewing

·Display resolution 0.01mm & 0.0005inch

·Zero setting

·With calibration certificate

Useful Functiions:-

·\mm/inch

· Preset Reference

· Manual/Auto power off

• Strong construction
• Large Digits for better viewing
• Zero setting
• With Calibration certificate

Dial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability

• Designed to probe surfaces that cannot be reached with a normal dial gage. Useful both for alignment and for measurement purposes.
• Mitutoyo’s proprietary new design permits smooth pointer operation.
• Strong frame provides excellent rigidity and durability.
• The pointer and carbide contact point are only slightly magnetizable*, and so they are hardly affected by a magnetic environment. In addition, models with a ruby contact point are available. The ruby contact point also has several times the abrasion resistance of carbide contact point and is safely usable with an electric discharge machine thanks its being a non-conductor.
• Clear and concise wide dial face allows excellent visibility.
• The surface of the crystal is hard-coated for excellent scratch resistance.
• Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT waterproof.)
• The main unit is equipped with three dovetails to which the stem with dovetail groove ø6 (standard accessory) can be attached. This greatly improves convenience as the attachment location can be adjusted as needed.
• Five types are available: horizontal, horizontal (20º tilted face), vertical, parallel, and universal, allowing users to select according to their needs.
• Completed products are inspected according to JIS B 7533:2015. Horizontal, horizontal (20º tilted face), and vertical types are inspected with the dial face in the upward orientation, while the parallel type is inspected with the dial face in the vertical orientation to guarantee their accuracy

• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm. All types come with limit markers and a bezel clamp as standard.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of a hard coating on the surface of the crystal makes the gage highly scratchand chemical-resistant

• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on.
• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters.
• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page A-3)

DIGITAL INDICATORES(STANDARD TYPE)

• Button function: on/off, inch/mm, zero, data preset, change measuring direction, absolute/incremental measurement

• Keep preset data in memory after restart
• CR2032 battery, automatic power off
• Data output
• Optional accessory: data output cable (code 7315-, 7302-, 7305-),backs (page 129-130), contact points (page 126-128)

• Specification: IS, DIN, ANSI & JIS
• Every plunger dial gauge carries a calibration certification giving actual values
• Hardened stem for trouble free clamping
• Spindle made of stainless steel
• Fitted with tungsten carbide ball anvil
• Rigid brass case for increased rigidity
• Strong and smooth metal bezel
• Supplied with tolerance pointers
• Aesthetically appealing protective top cap in black color
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503

We provide all the gauges as per the requirement of the customer. These gauges are extensively used for measuring the width, thickness and depth of bore well. Our gauges are available at market leading prices and can be procured in various sizes and designs as per the specific demands of clients. Our range is highly acclaimed for its variegated features like rugged construction, safe usage and long lasting performance. our clients can avail at reasonable price.

Specifications:

DIGITAL INDICATORES(STANDARD TYPE)

• Button function: on/off, inch/mm, zero, data preset, change measuring direction, absolute/incremental measurement
• Keep preset data in memory after restart
• CR2032 battery, automatic power off
• Data output
• Optional accessory: data output cable (code 7315-, 7302-, 7305-), backs (page 129-130), contact points (page 126-128)

Resolution 0.001mm/0.00005”

• Shockproof dial indicator
• Made of stainless steel
• Supplied with manufaturer calibration certificate

• Graduation 0.02mm

• Ceramic spindle tip and anvil
• Buttons: on/off, inch/mm, zero, data preset, change measuring direction, absolute/incremental measurement
• Keep preset data in memory after restart
• Battery CR2032
• Automatic power off (time is adjustable)
• Data output
• Optional accessory: data output cable (code 7315-50M)

• Suited to the measurement of low-volume manufactured parts.
• Easy to use when operating one-handed due to retractable anvil.
• In the 25mm measuring range, the model lineup offers a choice of left or right positioning of the anvil-retraction button.
• Greatly improved accuracy: indication error and graduation of 1μm.
• Water-proof to protection level IP54.
• Hard-coated crystal: enhanced oil and scratch resistance.
• Indicator scale is large and easy-to-read.
• The zero position and adjustable limit  markers, for GO/±NG testing, are easily set.
• Measuring faces: Carbide
• Retractable anvil with indicator for three-wire measurements ofpitch diameter of precision screws, roundness and parallelismmeasurements.

• Micrometer head graduation 0.002mm
• Dial indicator: range ±0.04mm, graduation 0.001mm, accuracy 0.001mm
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm)

• Best finish
• Waterproof
• Optimal working