Gokul Traders

• Non waterproof
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Meet DIN862
• Battery CR2032
• Made of stainless steel
• Optional accessory: extension base (code 6141)

• Non waterproof
• Measure depth of small groove & hole, also measure depth of tire tread
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Supplied with zero set surface 
• Automatic power off,  move the digital unit to turn on power
• Battery CR2032
• Made of stainless steel

• Internal caliper gauge to measure internal diameter of cylindrical workpiece and groove diameters.
• It can measure groove diameter of ” o” ring by modifying spare contact point.
• Set dimension within ± 5 mm (indicating range 10 mm) can be comparatively measured by alternatively using spare contact points in accordance with measured dimensions.
• Adjustable frame mechanism.

A Thread Depth Gauge developed specifically to monitor compliance with safety requirements for minimum trade depth of automobile tyres. Additionally, it is useful for gauging general tyre wear in the range of 0-8 mm.

Features:

• Every Thread Depth gauge carries a calibration certificate giving actual values
• The thread depth gauge gives accurate readings to 0.1mm / 0.004Inch
• A ‘telltale’ maximum reading pointer is fitted to retain measurement, allowing the thread depth gauge to be applied to tyre positions where it cannot be easily read
• The dial has coloured bands for quick and easy reading

The Bowers Universal Gauge’s ingenious modular design enables it to be quickly configured to suit almost any measuring challenge, both internal and external. The Universal’s clever constant measuring pressure device ensures accuracy and consistency of reading. A large variety of measuring contacts and adaptors are available for the Universal Gauge enabling countless measuring tasks to be completed with ease. Accessories for the measurement of threads, grooves, splines, gears, hole centers and many others are available as standard and special adaptations for more non-standard applications can be quoted on request.

Features:

• Internal and External measurement
• Large measuring range possible 0-3000mm
• (0-118″) with interchangeable extensions
• Constant measuring force
• Digital or Mechanical readout display
• Large range of accessories for standard measurement of threads, grooves, splines, diameters, lengths, shallow spigots and recess diameters etc.
• Special anvil designs available on request

• Every gauge carries a calibration certificate giving actual values
• For quick measurement of thickness of sheets, paper, leather etc
• In series K130, K138/L and K142, K145, K150 measurement pressure is independent of the user, resulting in accurate readings of thickness
• K138 ‘Push Down Type’ thickness gauge is particularly useful where fine measurement is not required – for example plywood
• Well-balanced frames and handgrips coupled with lightweight make these gauges easy to use for measurement
• Supplied with Ø10 mm flat anvil as standard. Can also be supplied with Ø20 mm flat anvil on request

• The Harpenden Skinfold Caliper is a precision instrument designed for use in the performance of Skinfold thickness measurements (from which estimates of body fat are derived) The use of this instrument has been well established and documented over the past 40 years
• Designed in 1958 in collaboration with D. J. M. Tanner, a prominent force in the use of Skinfold measurements in the derivation of body fat measurement
• It is the only Caliper CE marked under the Medical Devices Directive 93 / 42 / EEC for a Class 1 Device with Measuring Function and is calibrated using masters traceable to National Standards
• It is used all over the world in applications including diagnostics & research, nutrition/malnutrition, obesity, eating disorder assessment (especially in sports) and juvenile growth disorders
• It is supplied with a handbook which includes tables for body fat% versus Skinfold thickness in males & females of all ages based on the Durnin & Womersley systems
• It is also supplied with Body Assessment Software (Optional)

INTERNAL DAIL CALIPER GAGES

BAKER CRANKSHAFT WEB DEFLECTION GAUGE

Excessive web deflection is dangerous for the engine. The Cause may be faulty or damaged crankshaft, damaged bearing, poor bearing alignment, excessive bearing clearance or slackness, faulty flanging to transmission, flywheel or vee belt pulley etc.

Features:-

·         Every gauge carries a calibration certificate giving actual values

·         Crankshaft Gauge measures the Web deflection of a crankshaft

·         The BAKER Crankshaft Gauge is developed to identify and avoid the problems mentioned above

·         The Gauge covers web-to-web distance of 60-600 mm

·         Supplied in a sleek wooden box

·         Gauge contacts are pointed & fit into dimples in the webs. A heavy spring pressure ensures that the Gauge is restrained but is free to turn in relation to the crankshaft. An adjustable balance weight restrains the Gauge against rotation of the crankshaft, so that the dial always faces the inspector