Call 08048609249 88% Response Rate

Send Email

Welding Gauges

Providing you the best range of v wac welding gauge, automatic weld gauge, 7 leaves leaf type weld gauges, 12 leaves weld gauge cum radius gauge, pipe welding gauge and welding gauge with effective & timely delivery.
V Wac Welding Gauge

V Wac Welding Gauge

Product Price: Rs 2,100 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
MaterialStainless Steel
Usage/ApplicationIndustrial
Least Count0.5mm
Range0-6mm
Surface FinishPolished
Country of OriginMade in India

This rugged gauge is fabricated in Stainless steel, with measuring range 0-6 mm. The pointer is easy to set & lock screw holds the gauge in position for later reference. All four required measurements are made with a single gauge. It is useful for welding, maintenance & quality department.

  • To check butt weld crown or reinforcement height
  • Range: 0-6mm with least count of 0.5mm
  • To check undercut depth near welding area.
    Range: 0-6mm with least count of 0.5mm
Get Best QuoteRequest A Callback
Automatic Weld Gauge

Automatic Weld Gauge

Product Price: Rs 2,100 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
MaterialStainless Steel
Usage/ApplicationIndustrial
Surface FinishPolished
Packaging TypeBox
Country of OriginMade in India
This rugged gauge fabricated in stainless steel, will measure the important dimensions of weld preparations & of completed butt and fillet welds. It is intended for general fabrication work in the shop or on-site and rapidly measures weld features like tolerance of convexity, tolerance of reinforcement, concavity and underfil, to determine size of fillet weld. The scales are graduated in metric units, It is packed in a protective case & an instruction leaflet is provided.
Get Best QuoteRequest A Callback
7 Leaves Leaf Type Weld Gauges

7 Leaves Leaf Type Weld Gauges

Product Price: Rs 1,750 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
BrandKristeel
Packaging TypeBox
Surface FinishPolished
UsageIndustrial
Country of OriginMade in India
This rugged gauge is fabricated in stainless steel & allows fast, accurate measurement of 11 fillet weld sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16'/ , 5/8, 3/4, 7/8, and 1" and their metric equivalent. Also used to 2 determine weld size, either concave or convex. Each blade is made of 1.25" x 4" cold rolled stainless steel to resist rust and bending. The blades are deburred to remove rough edges. The set of seven blades is packed in a handy 2" x 2.5" pocket case with the "user manual attached for easy reference.
Get Best QuoteRequest A Callback
12 Leaves Weld Gauge Cum Radius Gauge

12 Leaves Weld Gauge Cum Radius Gauge

Product Price: Rs 950 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
Measuring Range0 to 13 mm
MaterialStainless Steel
Usage/ApplicationIndustrial
Surface FinishPolished
Country of OriginMade in India
This stainless steel Gauge is made as a set of 12 leaves or sizes from 3mm to 12mm. Each leaf can check welding throat size & concave radius profiles also.
Get Best QuoteRequest A Callback
Pipe Welding Gauge

Pipe Welding Gauge

Product Price: Rs 1,745 / PieceGet Best Price

Product Brochure

Product Details:
BrandInsize
Measuring Range0-45mm (0-1-3/4")
MaterialStainless Steel
Accuracy+-0.5mm
Graduation1mm (1/16")
Country of OriginMade in India
Get Best QuoteRequest A Callback
Welding Gauge

Welding Gauge

Product Price: Rs 1,240 / PieceGet Best Price

Product Brochure

Product Details:
BrandInsize
Measuring Range0-10mm
MaterialStainless Steel
Product Code4838
Graduation1mm
Accuracy+-0.5mm
Get Best QuoteRequest A Callback
Skew T Fillet Weld Gauge

Skew T Fillet Weld Gauge

Product Price: Rs 2,300 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
Last Count2mm and 2.5mm
MaterialStainless Steel
Surface FinishPolished
RangeFillet leg length 0-50mm and angles 30 degrees to 90 degrees.
Country of OriginMade in India
This rugged gauge is fabricate in stainless steel , to check fillet weld leg length of skewed members or members at 90 degrees. Also , check members angles 30 degree to 90 degree. Pointer is adjustable in length to set as per welded geometry. All markings are permanent etched and in black color for easy looking.
Get Best QuoteRequest A Callback
Digital Welding Gauge

Digital Welding Gauge

Get Latest Price

Product Brochure

Product Details:
BrandKristeel
Measuring RangeThroat upto 20 mm and Butt Reinforcement upto 4.0 mm As per given in following diagrams
MaterialStainless Steel
Usage/ApplicationIndustrial
Base Thickness6.0 mm
Scale Thickness3.0 mm
Country of OriginMade in India
This rugged gauge, fabricated in stainless steel, will measure the important dimensions of weld preparations and of completed butt and fillet welds. It is intended for general fabrication work in the shop or on-site and rapidly measures the following weld features : angle of preparations 60, 70, 80 & 90 degree. Fillet weld leg throat size, Butt weld reinforcement.
Get Best QuoteRequest A Callback
Pipe Pit Gauge

Pipe Pit Gauge

Product Price: Rs 2,600 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
Range0 to 13mm
Surface FinishPolished
MaterialStainless Steel
Packaging TypeBox
Country of OriginMade in India
This small pocket sized stainless steel gauge is designed to identify the condition of pipe like Depth of Pit, Pipe thickness etc. Gauge includes 110mm long scale in Metric & Inch. Conversion Table available on back side & formulas on top.
Get Best QuoteRequest A Callback
Hi-Lo Weld Gauge

Hi-Lo Weld Gauge

Product Price: Rs 3,200 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
MaterialStainless Steel
Usage/ApplicationIndustrial
Surface FinishPolished
Model NumberHLWG
Country of OriginMade in India

This Rugged Gauge is used to measure :

  • Internal Misalignment
  • Pipe wall thickness
  • Fit-up Gap
  • Gauge Bevel on end preparations
  • Fillet Weld Size
  • Crown Height of butt Welds

It is also used to eliminate the major cause of socket weld cracking
Get Best QuoteRequest A Callback
Bridge Cam Weld Gauge

Bridge Cam Weld Gauge

Product Price: Rs 1,600 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
MaterialStainless Steel
Usage/ApplicationIndustrial
Surface FinishPolished
Packaging TypeBox
Country of OriginMade in India
This rugged gauge is fabricated in stainless steel used to measure the important Dimensions of weld preparations & of completed Butt and fillet welds. It is intended for general fabrication work in the shop or on-site. It rapidly measures Angle preparation (0o to 60o), Excess weld metal, Fillet weld leg length, Throat length, Misalignment & hole sizes for butt weld, butt-weld reinforcement, General Linear Measurement upto 60mm or 2 inches- Scales are graduated in metric units & supplied in a preventive case with instruction leaflet.
Get Best QuoteRequest A Callback
Weld Fillet Gauge

Weld Fillet Gauge

Product Price: Rs 1,400 / PieceGet Best Price

Product Details:
BrandKristeel
MaterialStainless Steel
Surface FinishPolished
UsageIndustrial
Packaging TypeBox
Country of OriginMade in India
A versatile tool for the use of welding operator. The tool can be used with ease for weld joint preparatory functions as well as for checking of the weld joint. The tool combines a bore gauge, angle gauge, depth gauge & weld height gauge. The tool is made in stainless steel with polish finish.
Get Best QuoteRequest A Callback
Pocket Fillet Weld Gauge

Pocket Fillet Weld Gauge

Product Price: Rs 630 / PieceGet Best Price

Product Brochure

Product Details:
BrandKristeel
MaterialStainless Steel
Surface FinishPolished
Usage/ApplicationIndustrial
Packaging TypeBox
Country of OriginMade in India
This rugged gauge, fabricated in stainless steel, is made of sets of 2 Blades with permanent markings. Gauge leaf can check welding actual throat size and fillet weld leg sizes. It is useful for Welding, Maintenance & Quality Department. Both the leaves are assembled in handy chain & packed in PVC pouch.
Get Best QuoteRequest A Callback
Digital Welding Gauge

Digital Welding Gauge

Get Latest Price

Product Brochure

Product Details:
BrandInsize
Display TypeDigital
Measuring Range0-7mm
Resolution0.01mm/0.0005"
MeasurementCrown Height
Accuracy+-0.03mm
Product Code4831
Country of OriginMade in India
Get Best QuoteRequest A Callback
Fillet Welding Gauge

Fillet Welding Gauge

Product Price: Rs 875 / PieceGet Best Price

Product Brochure

Product Details:
BrandInsize
MaterialStainless Steel
Usage/ApplicationIndustrial
Product Code4836
Available Size3,4, 5, 6, 8, 9, 10, 11, 12, 14, 16, 19, 22, 25 mm
Accuracy+-0.5mm
Country of OriginMade in India
Get Best QuoteRequest A Callback
Electronic Digital Welding Seam Gauge

Electronic Digital Welding Seam Gauge

Get Latest Price

Product Details:
BrandInsize
Model Name/Number4831-12
Measuring Range0-12mm/0-0.5"
ButtonsZero, mm/inch, on/off
BatterySR44 or LR44

Electronic Digital Welding Seam Gauge is used to measure the welding seams in corner and flat welding seams. This is prepared by using the ultimate quality of stainless steel. Electronic Digital Welding Seam Gauge is supplied to our clients in time without any failure in the quality. We always meet our client satisfaction. It is widely preferred for low input and high performance with accurate results, durability and reliability. This is available in different measurements.

 

Code

Range

4831-12

0-12mm/0-0.5”

4831-20

0-20mm/0-0.8”

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Gokul Traders. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.